Yokogawa Direct Panel-Mount Type INCITOR

Yokogawa  Direct Panel-Mount Type INCITOR

The SIHN (Direct Panel Mounting) Indicator takes little panel space, yet is easy to read. It accepts either 1 to 5 V or 4 to 20 mA DC inputs.

Yokogawa  Direct Panel-Mount Type INCITOR

STANDARD SPECIFICATIONS
Input Signal
  Analog Input: 1 to 5 V or 4 to 20 mA DC (one input).
  Input Resistance: 2 kΩ (for 1 to 5 V DC input). Up to

                    25 Ω (for 4 to 20 mA DC input).

Yokogawa  Direct Panel-Mount Type INCITOR

Indicator
  Indicator Type: Single-pointer moving coil meter.
  Pointer Color: Red.
  Indication Range: 0 to 100%.
  Indicator Accuracy: 1% of span.
  Scale Length: 100 mm.
  Scale Marking: Major divisions are marked. Scale is
   interchangeable.
Normal Operating Conditions
  Ambient Temperature: 0 to 50°C.
  Ambient Humidity: 5 to 90% relative humidity (noncondensing).
  Insulation Resistance:
  Between Input Terminals and Case (ground): 100
   MΩ/500 V DC.
  Dielectric Strength:
  Between Input Terminals and Case: 500 V AC for 1
   minute.

  Wiring:
  Signal Wiring from the Field: ISO M4 size (4mm)
    screws on terminal block.
  Mounting: These instruments mount directly in a
    panel. Instrument may be inclined with front up
    to 75° from vertical (rear of instrument lower than
    front). (Indicator zero may need readjustment).
  Nameplate:
  Size: 12.6 × 33.8 mm, cream semi-gloss finish.
  Lettering: In black, one or two rows each up to nine
    alphanumeric characters long.
  Front Panel Finish: Dark Green (Munsell 2.5GY 3/1).
  Dimensions: 150 (H) × 37.5 (W) × 179 ((D): depth

    behind panel) (mm).

Yokogawa  Direct Panel-Mount Type INCITOR

Yokogawa  Direct Panel-Mount Type INCITOR