P+F Inductive sensor NCB1,5-18GM60-E2-D-V1

P+F Inductive sensor NCB1,5-18GM60-E2-D-V1

·1.5 mm flush
·Compression proof up to 350 bar, dynamic on active surface
·For applications in hydraulic cylinder

P+F Inductive sensor NCB1,5-18GM60-E2-D-V1

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		1.5 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 1.22 mm
Reduction factor rAl		0.3
Reduction factor rCu		0.2
Reduction factor r304		0.5
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 1500 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 10 mA
Limit data                    P+F Inductive sensor NCB1,5-18GM60-E2-D-V1
Operating pressure		350 bar (5076.4 psi)
Functional safety related parameters            P+F Inductive sensor NCB1,5-18GM60-E2-D-V1
MTTFd		1240 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0%
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007
		IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-35 ... 80 °C (-31 ... 176 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		Epoxy (black)
Degree of protection		IP67

P+F Inductive sensor NCB1,5-18GM60-E2-D-V1