Current Location: Home> Product Class> MTL> MTL4500>

MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE

Product Name：MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE
Product Number：MTL4510
Brand：MTL
Views：252

你添加了1件商品查看购物车

简单介绍

MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE

MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE

的详细介绍

MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510
Overview

The MTLx510 enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors located in a hazardous area. Each pair of output transistors shares a common

terminal and can switch +ve or –ve polarity signals. A range of module configurations is available (see Table 1) through the use of selector switches. When proximity detector modes are selected, LFD is enabled and the output switches to OFF if a line fault is detected.
MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510

SPECIFICATION

See also common specification

Number of channels

4, configured by switches

Location of switches

Zone 0, IIC, T6 hazardous area

Div 1, Group A hazardous location

Location of proximity detectors

Zone 0, IIC, T4-6 hazardous area if suitably certified

Div 1, Group A, hazardous location

Hazardous-area inputs

Inputs conforming to BS EN60947–5–6:2001 standards for

proximity detectors (NAMUR)

Voltage applied to sensor

7 to 9V dc from 1kΩ ±10%

Input/output characteristics

Normal phase
MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510

Outputs closed if input > 2.1mA (< 2kΩ in input circuit)

Outputs open if input < 1.2mA (> 10kΩ in input circuit)

Hysteresis: 200µA (650Ω) nominal

Line fault detection (LFD) (when selected)

User-selectable via switches on the side of the unit.

Open-circuit alarm on if Iin < 50µA

Open-circuit alarm off if Iin > 250µA

Short-circuit alarm on if Rin < 100Ω

Short-circuit alarm off if Rin > 360Ω

Note: Resistors must be fitted when using the LFD facility with a contact input

500Ω to 1kΩ in series with switch

20kΩ to 25kΩ in parallel with switch

Safe-area outputs
MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510

Floating solid-state outputs compatible with logic circuits

Operating frequency: dc to 500Hz

Max. off-state voltage: ± 35V

Max. off-state leakage current: ± 50µA

Max. on-state resistance: 25Ω

Max. on-state current: ± 50mA

LED indicators

Green: power indication

Yellow: four: on when output active

Red: LFD indication + faulty channel’s yellow LED flashes

Maximum current consumption

40mA at 24V (with all output channels energised)

Power dissipation within unit

0.96W at 24V, with 10mA loads

Safety description (each channel)

Uo=10.5V Io=14mA Po=37mW Um = 253V rms or dc
MTL4510 SWITCH PROXIMITY DETECTOR INTERFACE MTL4510
Contact Information
Email address:Jackie@hkxytech.com jackie2018@126.com
Whatsapp:+86 15717178751
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751

RELATED PRODUCTS