MTL5599 DUMMY ISOLATOR MTL 5599 DUMMY ISOLATOR

MTL5599 DUMMY ISOLATOR MTL 5599 DUMMY ISOLATOR

MTL5599 MTL5000 SERIES COMMON SPECIFICATION
Connectors
Each MTL5000 unit is supplied with signal and power connectors,
as applicable.
When using crimp ferrules for the hazardous and non-hazardous
(safe) signal connectors the metal tube length should be 12mm
and the wire trim length 14mm. For the power connectors the
metal tube length should be 10mm and the wire trim length
12mm.

MTL5599 DUMMY ISOLATOR MTL 5599 DUMMY ISOLATOR
See INM5000 for recommended ferrules.
Isolation
250V rms between input, output and power supply terminals,
tested at 1500V rms minimum between safe- and hazardous-area
terminals. MTL5073, output and power supply not isolated.
Location of units
Safe area
Terminals
Accommodate conductors of up to 2.5mm2 stranded or singlecore
Mounting

MTL5599 DUMMY ISOLATOR MTL 5599 DUMMY ISOLATOR
On 35mm (top hat) rail to :
EN 50022–35 x 7.5; BS 5584;
35 x 27 x 7.3 DIN 46277
Ambient temperature limits
–20 to +60°C (–6 to +140°F) operating
–40 to +80°C (–40 to +176°F) storage
Humidity
5 to 95% relative humidity
Weight
110g approx (except where indicated)DUMMY ISOLATOR
MTL5599 DUMMY ISOLATOR MTL 5599 DUMMY ISOLATOR

MTL5501-SR  FAIL-SAFE SWITCH/PROXIMITY DETECTOR INTERFACE WITH LFD
MTL5510 SWITCH/ PROXIMITY DETECTOR INTERFACE 4-CHANNEL, DIGITAL INPUT
MTL5510B SWITCH/ PROXIMITY DETECTOR INTERFACE 4-CHANNEL, MULTI-FUNCTION, DIGITAL INPUT
MTL5511 SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, WITH LINE FAULT DETECTION
MTL5513  SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5514  SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5514D  SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, DUAL OUTPUT, LFD, PHASE REVERSAL
MTL5516C SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, WITH LINE FAULT DETECTION
MTL5517 SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5521 SOLENOID/ ALARM DRIVER LOOP-POWERED, IIC
MTL5522  SOLENOID/ALARM DRIVER LOOP-POWERED, IIB
MTL5523 SOLENOID/ALARM DRIVER WITH LINE FAULT DETECTION, IIC
MTL5523V - VL  SOLENOID/ALARM DRIVER WITH LINE FAULT DETECTION, IIC
MTL5524  SOLENOID/ALARM DRIVER SWITCH OPERATED WITH OVERRIDE, IIC
MTL5525 SOLENOID/ALARM DRIVER SWITCH OPERATED WITH OVERRIDE, IIC, LOW POWER
MTL5526 SWITCH-OPERATED RELAY 2–CHANNEL IS–OUTPUT
MTL5541 REPEATER POWER SUPPLY 4/20MA, HART, 2- OR 3-WIRE TRANSMITTERS
MTL5541A  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5541AS CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5541S REPEATER POWER SUPPLY 4/20MA, HART, 2- OR 3-WIRE TRANSMITTERS
MTL5544  REPEATER POWER SUPPLY 2-CHANNEL, 4/20MA, HART, 2- OR 3- WIRE TRANSMITTERS
MTL5544A  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5544AS  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5544D REPEATER POWER SUPPLY SINGLE CHANNEL, 4/20MA, HART FOR 2- OR 3-WIRE TRANSMITTERS, TWO OUTPUTS
MTL5544S REPEATER POWER SUPPLY 2-CHANNEL, 4/20MA, HART, 2- OR 3- WIRE TRANSMITTERS
MTL5546 ISOLATING DRIVER FOR 4–20MA HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5546Y  ISOLATING DRIVER FOR 4–20MA HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5549 ISOLATING DRIVER TWO-CHANNEL, FOR 4–20MA, HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5549Y ISOLATING DRIVER TWO-CHANNEL, FOR 4–20MA, HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5575 TEMPERATURE CONVERTER THC OR RTD INPUT + ALARM
MTL5576-RTD TEMPERATURE CONVERTER RTD/POTENTIOMETER INPUT, 2-CHANNEL
MTL5576-THC TEMPERATURE CONVERTER MV/THC INPUT, 2-CHANNEL
MTL5581 MILLIVOLT/THERMOCOUPLE ISOLATOR FOR LOW-LEVEL SIGNALS
MTL5582 RESISTANCE ISOLATOR TO REPEAT RTD SIGNALS
MTL5531  VIBRATION TRANSDUCER INTERFACE
MTL5532  PULSE ISOLATOR PULSE & 4/20MA CURRENT OUTPUTS
MTL5533 VIBRATION TRANSDUCER INTERFACE 2-CHANNEL
MTL5561  FIRE AND SMOKE DETECTOR INTERFACE 2-CHANNEL
MPA5500  A.C. POWER ADAPTOR
MTL5599 DUMMY ISOLATOR
MTL5991 24V DC POWER SUPPLY