MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE

MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE

MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE

The MTLx531 repeats a signal from a vibration sensor in a hazardous
area, providing an output for a monitoring system in the safe area.
The interface is compatible with 3-wire eddy-current probes and
accelerometers or 2-wire current sensors; the selection is made by a
switch on the side of the module.
SPECIFICATION
See also common specification
Number of channels
One

MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE
Sensor type
2- or 3-wire vibration transducer
Location of signal source
Zone 0, IIC, T4–6 hazardous area if suitably certified
Div. 1, Group A hazardous location
Hazardous-area input
Input impedance
(terminals 2 & 3): 10kΩ
Transducer supply voltage, 3-wire (terminals 3 & 1)
Transducer supply current, 2-wire
3.3mA (nom.) for 2-wire sensors, user selectable by switch
Signal range

MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE
Minimum –20V, maximum –0.5V
DC transfer accuracy at 20°C
<±50mV
AC transfer accuracy at 20°C
0Hz to 1kHz: ±1%
1kHz to 10kHz: –5% to +1%
10kHz to 20kHz: –10% to +1%
Temperature coefficient
±50ppm/°C (10 to 65°C)
±100ppm/°C (–20 to 10°C)
Voltage bandwidth
–3dB at 47kHz (typical)
Phase response
<14μs, equivalent to:
–1° at 200Hz
–3° at 600Hz
–5° at 1kHz
–50° at 10kHz
–100° at 20kHz
Safe-area output impedance
<20Ω
LED indicator

MTL5531 VIBRATION TRANSDUCER INTERFACE MTL5531 TRANSDUCER INTERFACE
Green: power indication
Supply voltage
20 to 35V dc
Maximum current consumption (10mA transducer load)
96mA at 24V
Maximum power dissipation within unit
2W
Safety description
Terminals 3 to 1
Uo=26.6V Io=94mA Po=0.66W Um = 253V rms or dc
Terminals 3 to 2
Non-energy-storing apparatus ≤1.5V, ≤0.1A and ≤25mW

MTL5501-SR  FAIL-SAFE SWITCH/PROXIMITY DETECTOR INTERFACE WITH LFD
MTL5510 SWITCH/ PROXIMITY DETECTOR INTERFACE 4-CHANNEL, DIGITAL INPUT
MTL5510B SWITCH/ PROXIMITY DETECTOR INTERFACE 4-CHANNEL, MULTI-FUNCTION, DIGITAL INPUT
MTL5511 SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, WITH LINE FAULT DETECTION
MTL5513  SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5514  SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5514D  SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, DUAL OUTPUT, LFD, PHASE REVERSAL
MTL5516C SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, WITH LINE FAULT DETECTION
MTL5517 SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, LINE FAULT DETECTION, PHASE REVERSAL
MTL5521 SOLENOID/ ALARM DRIVER LOOP-POWERED, IIC
MTL5522  SOLENOID/ALARM DRIVER LOOP-POWERED, IIB
MTL5523 SOLENOID/ALARM DRIVER WITH LINE FAULT DETECTION, IIC
MTL5523V - VL  SOLENOID/ALARM DRIVER WITH LINE FAULT DETECTION, IIC
MTL5524  SOLENOID/ALARM DRIVER SWITCH OPERATED WITH OVERRIDE, IIC
MTL5525 SOLENOID/ALARM DRIVER SWITCH OPERATED WITH OVERRIDE, IIC, LOW POWER
MTL5526 SWITCH-OPERATED RELAY 2–CHANNEL IS–OUTPUT
MTL5541 REPEATER POWER SUPPLY 4/20MA, HART, 2- OR 3-WIRE TRANSMITTERS
MTL5541A  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5541AS CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5541S REPEATER POWER SUPPLY 4/20MA, HART, 2- OR 3-WIRE TRANSMITTERS
MTL5544  REPEATER POWER SUPPLY 2-CHANNEL, 4/20MA, HART, 2- OR 3- WIRE TRANSMITTERS
MTL5544A  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5544AS  CURRENT REPEATER 4/20MA PASSIVE I/P FOR HART TRANSMITTERS
MTL5544D REPEATER POWER SUPPLY SINGLE CHANNEL, 4/20MA, HART FOR 2- OR 3-WIRE TRANSMITTERS, TWO OUTPUTS
MTL5544S REPEATER POWER SUPPLY 2-CHANNEL, 4/20MA, HART, 2- OR 3- WIRE TRANSMITTERS
MTL5546 ISOLATING DRIVER FOR 4–20MA HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5546Y  ISOLATING DRIVER FOR 4–20MA HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5549 ISOLATING DRIVER TWO-CHANNEL, FOR 4–20MA, HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5549Y ISOLATING DRIVER TWO-CHANNEL, FOR 4–20MA, HART VALVE POSITIONERS WITH LINE FAULT DETECTION
MTL5575 TEMPERATURE CONVERTER THC OR RTD INPUT + ALARM
MTL5576-RTD TEMPERATURE CONVERTER RTD/POTENTIOMETER INPUT, 2-CHANNEL
MTL5576-THC TEMPERATURE CONVERTER MV/THC INPUT, 2-CHANNEL
MTL5581 MILLIVOLT/THERMOCOUPLE ISOLATOR FOR LOW-LEVEL SIGNALS
MTL5582 RESISTANCE ISOLATOR TO REPEAT RTD SIGNALS
MTL5531  VIBRATION TRANSDUCER INTERFACE
MTL5532  PULSE ISOLATOR PULSE & 4/20MA CURRENT OUTPUTS
MTL5533 VIBRATION TRANSDUCER INTERFACE 2-CHANNEL
MTL5561  FIRE AND SMOKE DETECTOR INTERFACE 2-CHANNEL
MPA5500  A.C. POWER ADAPTOR
MTL5599 DUMMY ISOLATOR
MTL5991 24V DC POWER SUPPLY