Siemens 7MF4433 pressure transmitter Siemens 7MF4433

Siemens 7MF4433 pressure transmitter Siemens 7MF4433

Siemens 7MF4433 pressure transmitter Siemens 7MF4433

Design
The main components of the pressure transmitter are:
• Brass housing with silicon measuring cell and electronics
plate
• Process connection
• Electrical connection
The silicon measuring cell has a thin-film strain gage which is
mounted on a ceramic diaphragm. The ceramic diaphragm can
also be used for aggressive media.
The process connection to DIN EN 837-1 is made of brass and
has a male thread G½B or a female thread G1/8B.
The electrical connection is made using a plug to DIN 43650
with a M16x1.5 cable inlet.
Siemens 7MF4433 pressure transmitter Siemens 7MF4433

Benefits
• High measuring accuracy
• Sturdy brass housing
• For aggressive and non-aggressive media
• For measuring the pressure of liquids, gases and vapor
• Temperature-compensated measuring cell
• Compact design
Application
The pressure transmitter of the Z series for gage pressure
(7MF1562-...) is used above all in the following industrial areas:
• Power engineering
• Mechanical engineering
• Shipbuilding
• Water supply etc.
A concrete application example is the measurement of compressed
air containing oil in compressors or compressor stations.

Siemens 7MF4433 pressure transmitter Siemens 7MF4433

Main components:
• Stainless steel housing with ceramic measuring cell and electronics
module. The temperature-compensated ceramic
measuring cell has a thin-film strain gage which is mounted on
a ceramic diaphragm. The ceramic diaphragm can also be
used for aggressive media.
• Process connection made of stainless steel in diverse designs
(see Selection and Ordering data)
• Electrical connection made using a plug to DIN 43650 with the
cable inlet M16 x 1.5, ½-14 NPT or round plug connector M12.
The pressure transmitters with a nominal range ≥ 1 bar g
(≥ 14.5 psi g) are optionally available with or without explosion
protection.
Siemens 7MF4433 pressure transmitter Siemens 7MF4433