SCHNEIDER Soft Stater ATS48C11Q

SCHNEIDER Soft Stater ATS48C11Q

Main
range of product	Altistart 48
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Heavy duty industry and pumps
device short name	ATS48
power supply voltage	230...415 V - 15...10 %
motor power kW	55 kW at 230 V connection to the motor delta terminals for standard applications
	55 kW at 400 V connection in the motor supply line for standard applications
	75 kW at 400 V connection to the motor delta terminals for severe applications
	90 kW at 400 V connection to the motor delta terminals for standard applications
	22 kW at 230 V connection in the motor supply line for severe applications
	30 kW at 230 V connection in the motor supply line for standard applications
	45 kW at 230 V connection to the motor delta terminals for severe applications
	45 kW at 400 V connection in the motor supply line for severe applications
power dissipation in W	252 W for severe applications
	322 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 5 In)
Icl nominal current	110 A for connection in the motor supply line for standard applications
	110 A for connection in the motor supply line for severe applications
	191 A for connection to the motor delta terminals for standard applications
	191 A for connection to the motor delta terminals for severe applications

SCHNEIDER Soft Stater ATS48C11Q

Complementary
assembly style	With heat sink
function available	External bypass (optional)
power supply frequency	50...60 Hz - 5...5 %
power supply frequency limits	47.5...63 Hz
device connection	To the motor delta terminals
	In the motor supply line
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable
	(LO2) logic output 0 V common configurable
	(R1) relay outputs fault relay NO
	(R2) relay outputs end of starting relay NO
	(R3) relay outputs motor powered NO
output absolute accuracy precision	+/- 5 %
minimum switching current	10 mA at 6 V DC for relay outputs
maximum switching current	Logic output 0.2 A at 30 V DC
	Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms
	Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C
	(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
starting current	0.4...1.3 Icl adjustable
analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
max nodes number	31
protection type	Phase failure: line
	Thermal protection: motor
	Thermal protection: starter
marking	CE
operating position	Vertical +/- 10 degree
height	290 mm
width	190 mm
depth	235 mm
net weight	8.3 kg
Motor power range AC-3	15…25 kW at 200…240 V 3 phases
	30…50 kW at 200…240 V 3 phases
	30…50 kW at 380…440 V 3 phases
	55…100 kW at 380…440 V 3 phases
motor starter type	Soft starter

SCHNEIDER Soft Stater ATS48C11Q