Schneider Variable speed drive ATV630D45M3

Schneider Variable speed drive ATV630D45M3

Main
range of product	Altivar Process ATV600
product or component type	Variable speed drive
product specific application	Process and utilities
device short name	ATV630
variant	Standard version
product destination	Synchronous motors
	Asynchronous motors
EMC filter	Without EMC filter
IP degree of protection	IP21IEC 61800-5-1
	IP21IEC 60529
degree of protection	UL type 1 UL 508C
type of cooling	Forced convection
supply frequency	50...60 Hz - 5...5 %
[Us] rated supply voltage	200...240 V - 15...10 %
motor power kW	45 kW normal duty)
	37 kW heavy duty)
Maximum Horse Power Rating	60 hp normal duty
	50 hp heavy duty
line current	155.1 A 200 V normal duty)
	130.4 A 240 V normal duty)
	128.5 A 200 V heavy duty)
	108.5 A 240 V heavy duty)
prospective line Isc	50 kA
apparent power	54.2 kVA 240 V normal duty)
	45.1 kVA 240 V heavy duty)
continuous output current	176 A 2.5 kHz normal duty
	149 A 2.5 kHz heavy duty
maximum transient current	193.6 A 60 s normal duty)
	223.5 A 60 s heavy duty)
asynchronous motor control profile	Variable torque standard
	Constant torque standard
	Optimized torque mode
synchronous motor control profile	Permanent magnet motor
	Synchronous reluctance motor
output frequency	0.0001…0.5 kHz
speed drive output frequency	0.1…599 Hz
nominal switching frequency	2.5 kHz
switching frequency	2.5...8 kHz with derating factor
	2...8 kHz adjustable
safety function	STO (safe torque off) SIL 3
discrete input logic	16 preset speeds
communication port protocol	Ethernet
	Modbus TCP
	Modbus serial
option card	Slot A communication module, Profibus DP V1
	Slot A communication module, Profinet
	Slot A communication module, DeviceNet
	Slot A communication module, Modbus TCP/EtherNet/IP
	Slot A communication module, CANopen daisy chain RJ45
	Slot A communication module, CANopen SUB-D 9
	Slot A communication module, CANopen screw terminals
	Slot A/slot B digital and analog I/O extension module
	Slot A/slot B output relay extension module
	Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
	communication module, BACnet MS/TP
	communication module, Ethernet Powerlink

Schneider Variable speed drive ATV630D45M3

Complementary
mounting mode	Wall mount
output voltage	<= power supply voltage
permissible temporary current boost	1.1 x In 60 s normal duty)
	1.5 x In 60 s heavy duty)
motor slip compensation	Automatic whatever the load
	Adjustable
	Not available in permanent magnet motor law
	Can be suppressed
acceleration and deceleration ramps	Linear adjustable separately from 0.01...9999 s
braking to standstill	By DC injection
protection type	Thermal protection: motor
	Safe torque off motor
	Motor phase break: motor
	Thermal protection: drive
	Safe torque off drive
	Overheating drive
	Overcurrent between output phases and earth: drive
	Overload of output voltage drive
	Short-circuit protection drive
	Motor phase break drive
	Overvoltages on the DC bus: drive
	Line supply overvoltage: drive
	Line supply undervoltage: drive
	Line supply phase loss drive
	Overspeed drive
	Break on the control circuit: drive
frequency resolution	Display unit: 0.1 Hz
	Analog input 0.012/50 Hz
electrical connection	Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
	Line side screw terminal 120 mm² AWG 4/0...250 kcmil
	Motor screw terminal 120 mm² 250 kcmil
connector type	RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
	RJ45 on the remote graphic terminal)Modbus serial
exchange mode	Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
number of addresses	1…247 Modbus serial
method of access	Slave Modbus TCP
supply	External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
	Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
	Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection
local signalling	for local diagnostic 3 LEDs
	for embedded communication status 3 LEDs (dual colour)
	for communication module status 4 LEDs (dual colour)
	for presence of voltage 1 LED (red)
width	11.42 in (290 mm)
height	36.30 in (922 mm)
depth	12.72 in (323 mm)
Net Weight	124.78 lb(US) (56.6 kg)

Schneider Variable speed drive ATV630D45M3