SCHNEIDER Soft Stater ATS48C59Q

SCHNEIDER Soft Stater ATS48C59Q

Main
range of product	Altistart 48
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Heavy duty industry and pumps
device short name	ATS48
power supply voltage	230...415 V - 15...10 %
motor power kW	132 kW at 230 V connection in the motor supply line for severe applications
	160 kW at 230 V connection in the motor supply line for standard applications
	250 kW at 230 V connection to the motor delta terminals for severe applications
	250 kW at 400 V connection in the motor supply line for severe applications
	315 kW at 400 V connection in the motor supply line for standard applications
	355 kW at 400 V connection to the motor delta terminals for severe applications
	400 kW at 400 V connection to the motor delta terminals for standard applications
power dissipation in W	1386 W for severe applications
	1731 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 5 In)
Icl nominal current	590 A for connection in the motor supply line for standard applications
	590 A for connection in the motor supply line for severe applications
	1022 A for connection to the motor delta terminals for standard applications
	1022 A for connection to the motor delta terminals for severe applications
Complementary
assembly style	With heat sink
function available	External bypass (optional)
power supply frequency	50...60 Hz - 5...5 %
power supply frequency limits	47.5...63 Hz
device connection	To the motor delta terminals
	In the motor supply line
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable
	(LO2) logic output 0 V common configurable
	(R1) relay outputs fault relay NO
	(R2) relay outputs end of starting relay NO
	(R3) relay outputs motor powered NO
output absolute accuracy precision	+/- 5 %
minimum switching current	10 mA at 6 V DC for relay outputs
maximum switching current	Logic output 0.2 A at 30 V DC
	Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms
	Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C
	(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
starting current	0.4...1.3 Icl adjustable
analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
max nodes number	31
protection type	Phase failure: line
	Thermal protection: motor
	Thermal protection: starter
marking	CE
operating position	Vertical +/- 10 degree
height	670 mm
width	400 mm
depth	300 mm
net weight	51.4 kg
Motor power range AC-3	110…220 kW at 200…240 V 3 phases
	250…500 kW at 380…440 V 3 phases
	250…500 kW at 200…240 V 3 phases
motor starter type	Soft starter
Environment
electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2
	Damped oscillating waves level 3 conforming to IEC 61000-4-12
	Electrostatic discharge level 3 conforming to IEC 61000-4-2
	Immunity to electrical transients level 4 conforming to IEC 61000-4-4
	Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
	Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	TCF
	DNV
	UL
	CCC
	CSA
	NOM 117
	SEPRO
	GOST
	C-Tick
noise level	55 dB
relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C)
	-10…40 °C (without derating)
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating
	> 1000...2000 m with current derating of 2.2 % per additional 100 m

SCHNEIDER Soft Stater ATS48C59Q