Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
Decription
Danfoss Sensor Technology (DST) P40I pressure
transmitter has been designed for use in
corrosive industrial environments such as
desalination systems, sea water cooling, waste
water, etc..
The enclosure of the pressure transmitter is
machined out from a single piece of Titanium to
eliminate any structural weaknesses. Titanium
is exceptionally resistant to a broad range of
acids and alkalis, as well as Sodium Chloride and
polluted waters. Titanium’s corrosion resistance
together with its low density, high strength and
erosion resistance, make this pressure transmitter
ideal for numerous chemical processing and
marine uses.
The pressure sensing element is made from
ceramic Al
2
O
3
96% which has excellent chemical
immunity and is suitable for nearly all aggressive
media. The pressure transmitter works following
the piezo resistive principle and the Wheatstone
bridge is screen printed directly on one side of
the ceramic diaphragm by means of Thick Film
technology.
Danfoss Sensor Technology (DST) P40I pressure
transmitter has been designed for use in
corrosive industrial environments such as
desalination systems, sea water cooling, waste
water, etc..
The enclosure of the pressure transmitter is
machined out from a single piece of Titanium to
eliminate any structural weaknesses. Titanium
is exceptionally resistant to a broad range of
acids and alkalis, as well as Sodium Chloride and
polluted waters. Titanium’s corrosion resistance
together with its low density, high strength and
erosion resistance, make this pressure transmitter
ideal for numerous chemical processing and
marine uses.
The pressure sensing element is made from
ceramic Al
2
O
3
96% which has excellent chemical
immunity and is suitable for nearly all aggressive
media. The pressure transmitter works following
the piezo resistive principle and the Wheatstone
bridge is screen printed directly on one side of
the ceramic diaphragm by means of Thick Film
technology.
Danfoss Sensor Technology (DST) P40I pressure transmitter has been designed for use in corrosive industrial environments such as desalination systems, sea water cooling, waste water, etc.. The enclosure of the pressure transmitter is machined out from a single piece of Titanium to eliminate any structural weaknesses. Titanium is exceptionally resistant to a broad range of acids and alkalis, as well as Sodium Chloride and polluted waters. Titanium’s corrosion resistance together with its low density, high strength and erosion resistance, make this pressure transmitter ideal for numerous chemical processing and marine uses.The pressure sensing element is made from ceramic Al2O3 96% which has excellent chemical immunity and is suitable for nearly all aggressive media. The pressure transmitter works following the piezo resistive principle and the Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology.
Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
Features
Designed for use in corrosive industrial environments such as desalination systems, medical industry, chemical processing, chlorate containing liquids, hydro-carbon processing, etc.
• Enclosure Titanium grade 2
• Temperature compensated
• Reverse polarity protected
• Gauge (relative)
• Wetted parts: Titanium & Ceramic
• Ceramic Al2O3 96%
• High linearity and low hysteresis value
• ROHS compliance
Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
Ordering standard
Danfoss Pressure transmitter DST P40I-3011-A1GB04-1 078G5005
