Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries

Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries

1-channel signal conditioner
< 24 V DC supply (Power Rail)
< Thermocouple, RTD, potentiometer or voltage input
< Current output 0/4 mA ... 20 mA
< Sink or source mode
< Configurable by PACTware
< Line fault (LFD) and sensor burnout detection
< Up to SIL 2 acc. to IEC 61508/IEC 61511

Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries

This signal conditioner provides the galvanic isolation between field circuits and control circuits.
The device converts RTD input signals or thermocouple input signals on the field side to 0/4 mA ... 20mA signals on the control side.
The removable terminal block KC-CJC-** is available for thermocouples when internal cold junction compensation is desired.
A fault is indicated by an LED and by user-configured fault indication outputs.
If the device is operated via Power Rail, additionally a collective error message is available.
The device is easily configured by the use of the PACTware configuration software.
For additional information, refer to the manual and www.pepperl-fuchs.com.

Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries

General specifications
Signal type Analog input
Functional safety related parameters
Safety Integrity Level (SIL) SIL 2
Supply
Connection terminals 9+, 10- or power feed module/Power Rail
Rated voltage Ur 19 ... 30 V DC
Ripple within the supply tolerance
Power dissipation/power consumption ≤ 0.98 W / 0.98 W

Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries

Pepperl Fuchs KCD2-UT2-1 Intrinsnic Safety Barries