The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4

The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4

The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4

·Rosemount Reliability—The Rosemount 8800D Vortex eliminates impulse lines, ports, and gaskets to improve reliability.
·Non-clog Design—Unique all welded, gasket-free construction which has no ports or crevices that can clog.
·SIL 2/3 Capable - The Rosemount 8800D Vortex is certified by an accredited 3rd party agency for use in safety instrumented systems up to SIL 3 (minimum requirement of single use [1oo1] for SIL 2 and redundant use [1oo2] for SIL 3).
·Vibration Immunity—Mass balancing of the sensor system, and Adaptive Digital Signal Processing (ADSP) provide vibration immunity.
·Replaceable Sensor—The sensor is isolated from the process and can be replaced without breaking the process seal. All line sizes use the same sensor design allowing a single spare to serve every meter.
·Simplified Troubleshooting—Device Diagnostics enable field verification of meter electronics and sensor without process shutdown.

The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4
Eliminate bypass piping for critical process installations
Traditional vortex installations in critical applications include a bypass line to allow process fluid to be re-directed around the vortex flow meter during routine sensor maintenance. Rosemount's unique non-wetted sensor can be installed without bypass piping, even in the most difficult process environments.

Improve process availability
Eliminate the need to shut down the process during routine maintenance and meter verification.

Enhances safety in hazardous process fluid applications
A Critical Process Valve (CPA option) enables access to the sensor cavity to verify that no process fluid is present.

The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4
Gain confidence in your mass flow measurement accuracy
Emerson MultiVariable Vortex provides the highest level of accurate steam mass flow over the widest range using an external
pressure and/or internal temperature measurement to capture your dynamic operating conditions. This delivers the confidence
required for your billing statements and also achieves better control in steam applications.
Reduce safety risks and maintenance burdens associated with many-component measurement solutions
By selecting Emerson MultiVariable Vortex, the safety risk to operators is reducing while at the same time, the maintenance
required is reduced and simplified. The plant area shutdown requirements are reduced while performing maintenance or
verification tasks, which also reduces the cost implications of being offline.
Overcome challenges of steam mass-flow measurement with a more durable solution
Emerson MultiVariable Vortex delivers the performance confidence and system reliability required in steam applications. Cost
implications related to poor quality steam, complex system architecture and process shutdowns are eliminated by reducing
vulnerability to leakage, clogging, plugging and freezing.
Available with flow computer for additional functionality
Integrating the multivariable vortex with a pressure transmitter for full pressure and temperature compensation of superheated
steam and various gases provides the following additional functionality:
·Remote Communications
·Heat Flow Calculations
·Remote Totalization
·Peak Demand Calculation
·Data Logging Capabilities
The Rosemount 8800D Series Vortex Flowmeter 8800DF010SJ1N1D1E7M5Q4