Plenty Of New Arrial Solenoid Driver KFD2-SL2-Ex1.B

Plenty Of New Arrial Solenoid Driver KFD2-SL2-Ex1.B

Plenty Of New Arrial Solenoid Driver KFD2-SL2-Ex1.B

·1-channel isolated barrier
·24 V DC supply (Power Rail)
·Output 45 mA at 11.7 V DC
·Logic input, non-polarized
·Up to SIL 2 acc. to IEC 61508
General specifications
Signal type Digital Output
Functional safety related parameters
Safety Integrity Level (SIL) SIL 2
Supply
Connection Power Rail or terminals 14+, 15-
Rated voltage 20 ... 30 V DC
Power consumption max. 1.7 W at 45 mA output current
Input
Connection side control side
Connection terminals 7, 8
Input current approx. 3 mA at 24 V DC
Signal level 1-signal: 16 ... 30 V DC
0-signal: 0 ... 5 V DC
Output
Connection side field side
Internal resistor 272 Ω
Current ≤ 45 mA
Voltage ≥ 11.7 V
Open loop voltage min. 24 V
Connection terminals 1+, 2- or 3-
Output rated operating current 45 mA
Output signal These values are valid for the rated operating voltages from 20 ... 30 V DC.

Energized/De-energized delay ≤ 20 ms / ≤ 20 ms

Plenty Of New Arrial Solenoid Driver KFD2-SL2-Ex1.B

Galvanic isolation
Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Power supply/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements LEDs
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Plenty Of New Arrial Solenoid Driver KFD2-SL2-Ex1.B

Conformity
Electromagnetic compatibility NE 21:2006
Degree of protection IEC 60529:2001
Protection against electrical shock EN 61010-1:2010
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass approx. 150 g
Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001