Moxa Ethernet remote I/O ioLogik E1200 Series

日期：2025-05-01 17:32

浏览次数：95

摘要：Moxa Ethernet remote I/O ioLogik E1200 Series Moxa Ethernet remote I/O ioLogik E1200 Series Moxa Ethernet remote I/O ioLogik E1200 Series

Moxa Ethernet remote I/O ioLogik E1200 Series

Features and Benefits

User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Class I Division 2, ATEX Zone 2 certification

Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Moxa Ethernet remote I/O ioLogik E1200 Series

Introduction

The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.

Daisy-Chained Ethernet I/O Connection

This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.

Moxa Ethernet remote I/O ioLogik E1200 Series

Specifications

Digital Inputs

Connector	Screw-fastened Euroblock terminal
Sensor Type	Dry contact Wet contact (NPN or PNP)
I/O Mode	DI or event counter
Dry Contact	On: short to GND Off: open
Wet Contact (DI to COM)	On: 10 to 30 VDC Off: 0 to 3 VDC
Counter Frequency	250 Hz
Digital Filtering Time Interval	Software configurable
Points per COM	ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels

Digital Outputs

Connector	Screw-fastened Euroblock terminal
I/O Type	ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source
I/O Mode	DO or pulse output
Current Rating	ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel
Pulse Output Frequency	500 Hz (max.)
Over-Current Protection	ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5 A per channel @ 25°C
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Over-Voltage Protection	35 VDC

MTBF

Time

ioLogik E1210 Series: 671,345 hrs

ioLogik E1211 Series: 923,027 hrs

ioLogik E1212 Series: 561,930 hrs

ioLogik E1213 Series: 715,256 hrs

ioLogik E1214 Series: 808,744 hrs

ioLogik E1240 Series: 474,053 hrs

ioLogik E1241 Series: 888,656 hrs

ioLogik E1242 Series: 502,210 hrs

ioLogik E1260 Series: 660,260 hrs

ioLogik E1262 Series: 631,418 hrs

Standards

Telcordia SR332

Moxa Ethernet remote I/O ioLogik E1200 Series

Ordering Information

ioLogik E1210 ioLogik E1210-T

ioLogik E1211 ioLogik E1211-T

ioLogik E1212 ioLogik E1212-T

ioLogik E1213 ioLogik E1213-T

ioLogik E1214 ioLogik E1214-T

ioLogik E1240 ioLogik E1240-T

ioLogik E1241 ioLogik E1241-T

ioLogik E1242 ioLogik E1242-T

ioLogik E1260 ioLogik E1260-T

ioLogik E1262 ioLogik E1262-T

Model Name	Input/Output Interface	Digital Output Type	Operating Temp.
ioLogik E1210	16 x DI	–	-10 to 60°C
ioLogik E1210-T	16 x DI	–	-40 to 75°C
ioLogik E1211	16 x DO	Sink	-10 to 60°C
ioLogik E1211-T	16 x DO	Sink	-40 to 75°C
ioLogik E1212	8 x DI, 8 x DIO	Sink	-10 to 60°C
ioLogik E1212-T	8 x DI, 8 x DIO	Sink	-40 to 75°C
ioLogik E1213	8 x DI, 4 x DO, 4 x DIO	Source	-10 to 60°C
ioLogik E1213-T	8 x DI, 4 x DO, 4 x DIO	Source	-40 to 75°C
ioLogik E1214	6 x DI, 6 x Relay	–	-10 to 60°C
ioLogik E1214-T	6 x DI, 6 x Relay	–	-40 to 75°C
ioLogik E1240	8 x AI	–	-10 to 60°C
ioLogik E1240-T	8 x AI	–	-40 to 75°C
ioLogik E1241	4 x AO	–	-10 to 60°C
ioLogik E1241-T	4 x AO	–	-40 to 75°C
ioLogik E1242	4 DI, 4 x DIO, 4 x AI	Sink	-10 to 60°C
ioLogik E1242-T	4 DI, 4 x DIO, 4 x AI	Sink	-40 to 75°C
ioLogik E1260	6 x RTD	–	-10 to 60°C
ioLogik E1260-T	6 x RTD	–	-40 to 75°C
ioLogik E1262	8 x TC	–	-10 to 60°C

Moxa Ethernet remote I/O ioLogik E1200 Series

Next: Yokogawa Absolute and Gauge Pressure Transmitter EJA510A and EJA530A
Previous: Rotork YTC Air Filter Regulator YT205 BN210 YT225 BN210