WAGO 750-469/000-006 | 2-Channel Analog Input Module | Thermocouple J | Diagnostics

2-Channel Analog Input Module Thermocouple J with Diagnostics

The WAGO 750-469/000-006 is a high-precision 2-channel analog input module specifically engineered for direct connection of Thermocouple J temperature sensors in industrial automation and process control applications . This module combines accurate temperature measurement with comprehensive diagnostic capabilities, ensuring reliable operation and rapid fault identification in critical temperature monitoring systems. Part of the versatile WAGO 750 Series I/O system, this module delivers professional-grade performance in an ultra-compact 12 mm wide housing .

Key Features and Product Highlights

• 2-Channel Thermocouple J Input: Provides two dedicated channels for direct connection of Thermocouple J (iron-constantan) temperature sensors, supporting a wide measurement range from -100°C to +1200°C .

• Integrated Per-Channel Diagnostics: Features comprehensive diagnostic capabilities with dual LED indicators per module. A green LED indicates operational readiness and error-free communication with the bus coupler, while a red LED provides immediate visual notification of wire break conditions .

• Internal Galvanic Isolation: Includes 500 V system/field isolation that enables operation of grounded sensors without measurement errors or ground loop issues .

• Automatic Cold Junction Compensation: Built-in cold junction compensation at each pair of terminal blocks mitigates clamping unit offset voltage across the entire 0–55°C operating range, ensuring accurate temperature measurements regardless of ambient conditions .

• High-Resolution Measurement: Delivers 0.1°C resolution across the full temperature range with automatic linearization of the entire thermocouple curve, eliminating the need for external signal conditioning .

• CAGE CLAMP® Connection Technology: Utilizes 8 x WAGO's proven CAGE CLAMP® spring-pressure connection technology for tool-free, vibration-proof, and maintenance-free wiring of solid, stranded, and fine-stranded conductors .

• Ultra-Compact Design: Occupies only 12 mm (0.472 inches) on the DIN rail, enabling high-density I/O configurations in space-constrained control cabinets .

• Direct Shield Connection: Features integrated shield connection that routes directly to the DIN rail, simplifying EMC-compliant installation and improving noise immunity .

  
                                              WAGO 750-469/000-006
  
  

  
  

Technical Specifications

Parameter	Specification
Manufacturer	WAGO Kontakttechnik GmbH & Co. KG
Item Number	750-469/000-006
GTIN / EAN	4045454393120
Product Type	Analog Input Module
Series	WAGO 750 Series I/O System
Number of Analog Inputs	2
Total Channels (Module)	2
Signal Type	Thermocouple
Sensor Types Supported	Thermocouple J (Iron-Constantan)
Temperature Measurement Range	-100°C to +1200°C
Resolution (Full Range)	0.1°C
Conversion Time (Typical)	320 ms
Measurement Error at 25°C	< ±6 K total (Voltage input < ±2 K; Cold junction compensation < ±4 K)
Temperature Coefficient	< ±0.2 K/K
Internal Resistance	1000 kΩ
Sensor Connection	2 x (2-wire)
Cold Junction Compensation	At each pair of terminal blocks
Data Width	2 x 16-bit data; 2 x 8-bit control/status (optional)
System Supply Voltage	5 VDC via data contacts
Power Consumption (5V System Supply)	65 mA
Isolation	500 V system/field
Connection Technology	8 x CAGE CLAMP®
Solid Conductor Wire Size	0.08 … 2.5 mm² / 28 … 14 AWG
Fine-Stranded Conductor Wire Size	0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length	8 … 9 mm / 0.31 … 0.35 inches
Width	12 mm / 0.472 inches
Height	100 mm / 3.937 inches
Depth	69.8 mm / 2.748 inches
Depth from DIN Rail Upper Edge	62.6 mm / 2.465 inches
Weight	Approximately 51.7 g
Housing Material	Polycarbonate; Polyamide 6.6
Color	Light gray
Mounting Type	DIN-35 rail
Mounting Position	Horizontal (standing/lying); vertical
Protection Rating	IP20
Operating Temperature	0°C to +55°C
Storage Temperature	-40°C to +85°C
Relative Humidity (No Condensation)	95%
Pollution Degree	2 per IEC 61131-2
Vibration Resistance	4g per IEC 60068-2-6
Shock Resistance	15g per IEC 60068-2-27
EMC Immunity to Interference	Per EN 61000-6-2, marine applications
EMC Emission of Interference	Per EN 61000-6-4, marine applications
Exposure to Pollutants	Per IEC 60068-2-42 and IEC 60068-2-43
Permissible SO₂ Concentration	25 ppm at 75% relative humidity
Permissible H₂S Concentration	10 ppm at 75% relative humidity
Fire Load	0.948 MJ
Country of Origin	Germany
Approvals / Certificates	CE, marine applications

WAGO 750-469/000-006 | 2-Channel Analog Input Module | Thermocouple J | Diagnostics

The WAGO 750-469/000-006 is designed for seamless integration into the WAGO 750 Series I/O system:

• Modular Design: Simply snap the module onto a standard DIN-35 rail alongside other 750 Series I/O modules. No tools required for mechanical assembly .

• Internal Data Bus: Communication with the bus coupler and neighboring modules occurs via internal data contacts, eliminating the need for complex backplane wiring .

• Fieldbus Compatibility: Works with all WAGO 750 Series bus couplers and controllers, supporting PROFIBUS, PROFINET, EtherCAT, EtherNet/IP, MODBUS, CANopen, DeviceNet, and more.

• Hot-Swapping Capability: Supports module replacement without interrupting communication bus operation, minimizing downtime during maintenance .

• Programming Support: Configure the module within standard industrial programming environments including WAGO-I/O-PRO, CODESYS, and all major PLC platforms supporting the WAGO 750 system .

WAGO 750-469/000-006 2-channel analog input module for Thermocouple J sensors. Features per-channel diagnostics, 0.1°C resolution, 500V isolation, and CAGE CLAMP® technology for industrial temperature measurement.