MTL4524S safe isolator Switch operated solenoid driver, 24V override

Product overview

MTL4524S safe isolator Switch operated solenoid driver, 24V override

                 MTL4524S  Switch operated solenoid driver, 24V override England origin products

MTL4524S product specification as below for your reference

MTL4524S safe isolator Switch operated solenoid driver, 24V override

MTL4524S SOLENOID/ALARM DRIVER switch operated with 24V override, IIC The MTL4524S enables an on/off device in a hazardous area to be controlled by a volt-free contact or a floating logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe or are classified as non-energy storing simple apparatus. By connecting a second safe-area voltage, the output can be disabled to permit, for example, a safety system to override a control signal.

MTL4524S safe isolator Switch operated solenoid driver, 24V override

SPECIFICATION

See also common specification

Number of channels

One

Location of load

Zone 0, IIC, T4–6 hazardous area if suitably certified

Div.1, Group A, hazardous location

Minimum output voltage Equivalent output circuit

22.2

22.2

13.6

Hazardous-area output

Minimum output voltage: 13.6V at 48mA

Maximum output voltage: 24V from 180Ω

Maximum off-state output voltage: 4V from 180Ω

Current limit: 48mA minimum

Output ripple

< 0.5% of maximum output, peak-to-peak

Control input (must be fully-floating)

Suitable for switch contacts or an opto-isolator

0 = input switch closed, transistor on or < 1.4V applied

1 = input switch open, transistor off or > 4.5V applied

Override input

A 24V logic signal applied across the terminals allows the solenoid/

alarm to be operated by the control input. If it is disconnected, the

solenoid/alarm is off.

0 = < 2.0V applied across terminals 8 & 9

1 = > 9.0V applied across terminals 8 & 9

(nominal switching point 4.5V)

Response time

Output within 10% of final value within 100ms

LED indicators

Green: power indication

Yellow: output status, on when output active

Maximum current consumption

100mA at 24V dc

Power dissipation within unit

1.3W with typical solenoid valve, output on

1.9W worst case

Safety description

Uo=25V Io=147mA Po= 0.92W Um = 253V rms or dc

Other related models for MTL4500 range as below

MTL4524S safe isolator Switch operated solenoid driver, 24V override 

MTL4501-SR       

MTL4504                

MTL4510              

MTL4510B                

MTL4511

MTL4513             

MTL4514D             

MTL4514_B          

MTL4516                   

MTL4516C

MTL4517             

MTL4521                

MTL4521L            

MTL4523                  

MTL4523L

MTL4523R           

MTL4523V-VL        

MTL4524              

MTL4524S                

MTL4525  

MTL4526             

MTL4541                

MTL4541A            

MTL4541AS              

MTL4541B

MTL4541P           

MTL4541S              

MTL4541T            

MTL4544                  

MTL4544A

MTL4544AS         

MTL4544B               

MTL4544D           

MTL4544S                 

MTL4546

MTL4546C           

MTL4546S              

MTL4546Y            

MTL4549                  

MTL4549C

MTL4549Y           

MTL4573                

MTL4575              

MTL4576-RTD           

MTL4576-THC

MTL4581             

MTL4582B              

MTL4531              

MTL4532                   

MTL4561

MTL4599             

MTL4599N

If you have any other question about MTL4524S, please feel free to contact us here!

Contact details

HONGKONG XIEYUAN TECH CO., LIMITED

Telephone:86-027-85508558

Mobile :86-15871691193(Whatapp&Wechat is available)

Skype:xyautomation

E-mail:sales1@hkxytech.com