Honeywell SPXCDALMNX gas detector Sensepoint XCD

  • Product Name:Honeywell SPXCDALMNX gas detector Sensepoint XCD
  • Product Number:SPXCDALMNX
  • Brand:Honeywell
  • Views:134
你添加了1件商品 查看购物车
简单介绍
Honeywell SPXCDALMNX gas detector Sensepoint XCD Honeywell SPXCDALMNX gas detector Sensepoint XCD Honeywell SPXCDALMNX gas detector Sensepoint XCD

Honeywell SPXCDALMNX gas detector Sensepoint XCD

的详细介绍
          Honeywell SPXCDALMNX gas detector Sensepoint XCD SPXCDALMNX

Overview

Honeywell SPXCDALMNX gas detector Sensepoint XCD SPXCDALMNX

Sensepoint XCD is designed for use in potentially explosive atmospheres. As such, installation

should follow national guidelines using suitable mechanically protected cable and glands or
conduit. Use 0.5mm2 (20AWG) to 2.5mm2 (~13AWG) cross sectional area cable as needed
to ensure minimum operating voltage at the detector, depending on installed cable length.
Cable diameter should be selected to maintain the minimum required voltage for the longest

installed cable length under maximum power.

Honeywell SPXCDALMNX gas detector Sensepoint XCD SPXCDALMNX

The Sensepoint XCD transmitter may be wired in either Current Sink or Current Source configuration. These two options are offered to allow greater flexibility in the type of control system that it can be
used with. Sink/Source is selectable via the switch located on the back side of the display module; accessible by removing the display module during installation/commissioning.
Sensepoint XCD uses three instantly recognisable ‘traffic light’ colours to indicate its status. The large tri-colour backlit LCD is steady green to indicate normal operation,flashes yellow to indicate a fault/warning

and flashes red to indicate an alarm. This allows anyone in the area to clearly see at a glance the status of any detector. This can be particularly useful to identify detector status if the detector is located in a difficult to access area or if a number of detectors are located in the same area.

Honeywell SPXCDALMNX gas detector Sensepoint XCD SPXCDALMNX

The Sensepoint XCD transmitter has an integral mounting plate consisting of four mounting holes
on the transmitter body. The transmitter may be fixed directly to a surface mounting, or to a
horizontal or vertical pipe/structure, 40.0-80.0mm (1.6 to 3.1") in diameter/cross section.
The pipe mounting bracket accessory (optional) may be used for this purpose.
User cable entries shown (2 x M20) are for ATEX/IECEx version enclosures. UL/c-UL versions
have 2 x ¾"NPT conduit entries. A suitable blanking plug is supplied which must be used to
seal any unused entry. The blanking plug must be suitably sealed to maintain the IP rating of
the detector
SPXCDALMFX               SPXCDALMRX                SPXCDALMPX                    SPXCDALMO1                  
SPXCDALMHX                SPXCDALMCX               SPXCDALMG1                    SPXCDALMNX                 SPXCDALMB1                SPXCDALMB2               SPXCDASMFX                     SPXCDASMRX               SPXCDASMPX                SPXCDASMO1              SPXCDASMHX                     SPXCDASMCX             SPXCDASMG1               SPXCDASMNX                SPXCDASMB1                     SPXCDASMB2
SPXCDALMFXM             SPXCDALMRXM            SPXCDALMPXM                   SPXCDALMO1M                 SPXCDALMHXM             SPXCDALMCXM            SPXCDALMG1M                   SPXCDALMNXM               SPXCDALMB1M             SPXCDALMB2M             SPXCDASMFXM                  SPXCDASMRXM           SPXCDASMPXM             SPXCDASMO1M            SPXCDASMHXM                  SPXCDASMCXM           SPXCDASMG1M            SPXCDASMNXM             SPXCDASMB1M                   SPXCDASMB2M
SPXCDULNFX                 SPXCDULNRX                SPXCDULNPX                      SPXCDULNO1                   SPXCDULNHX                 SPXCDULNCX               SPXCDULNG1                      SPXCDULNNX                 SPXCDULNB1                 SPXCDULNB2                SPXCDUSNFX                      SPXCDUSNRX             SPXCDUSNPX                 SPXCDUSNO1                SPXCDUSNHX                     SPXCDUSNCX              SPXCDUSNG1               SPXCDUSNNX                  SPXCDUSNB1                      SPXCDUSNB2
SPXCDULNFXM             SPXCDULNRXM            SPXCDULNPXM                     SPXCDULNO1M                 SPXCDULNHXM              SPXCDULNCXM             SPXCDULNG1M                  SPXCDULNNXM             SPXCDULNB1M               SPXCDULNB2M             SPXCDUSNFXM                   SPXCDUSNRXM           SPXCDUSNPXM                SPXCDUSNO1M            SPXCDUSNHXM                  SPXCDUSNCXM            SPXCDUSNG1M             SPXCDUSNNXM               SPXCDUSNB1M                   SPXCDUSNB2M
SPXCDALMTX4               SPXCDASMTX4              SPXCDULNTX4                     SPXCDUSNTX4               SPXCDALMTX4M             SPXCDASMTX4M            SPXCDULNTX4M                 SPXCDUSNTX4M             SPXCDALMRFD               SPXCDASMRFD              SPXCDULNRFD                   SPXCDUSNRFD           SPXCDALMRFDM             SPXCDASMRFDM            PXCDULNRFDM                 SPXCDUSNRFDM           SPXCDXSRFXSS           SPXCDXSRRXSS             SPXCDXSRPXSS                   SPXCDXSRB1SS
SPXCDXSRB2SS 

If you have any interest on this product,pls feel free to contact me.
Contact Information

Email address:Jackie@hkxytech.com  jackie2018@126.com
Whatsapp:+86 15717178751     
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751


 

Copy right © 2018 Power by www.yi-z.cn Management Portal
Contact Person: Jessica Yu;  Tel: 86-027-85508558  Fax: +86 027-85309780
Mobile: 86-15871691193 (Whatsapp & Telegram)  Email: sales1@hkxytech.com; Jackie@hkxytech.com   Skype: Jackie@hkxytech.com

link: www.isolatorbarrier.ltd