Current Location: Home> Product Class> ABB> ABB Positioner>

ABB TZIDC-120 Positioner V18347 Positioner

Product Name：ABB TZIDC-120 Positioner V18347 Positioner
Product Number：TZIDC-120
Brand：ABB
Views：290

你添加了1件商品查看购物车

简单介绍

ABB TZIDC-120 Positioner V18347 Positioner ABB TZIDC-120 Positioner V18347 Positioner ABB TZIDC-120 Positioner V18347 Positioner

ABB TZIDC-120 Positioner V18347 Positioner

的详细介绍

ABB TZIDC-120 Positioner V18347 Positioner
Overview

The TZIDC-120 is an electronically configurable positioner with communication capabilities designed for mounting to pneumatic linear or rotary actuators. It features a small and compact design, a modular

construction, and an excellent cost-performance ratio.
Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behavior.

An I/P module with subsequent pneumatic amplifier is used to control the pneumatic actuator. The well-proven I/P module proportionally converts the permanent electrical positioning signal from the CPU into

a pneumatic signal used to adjust a 3/3-way valve.

The air flow for pressurizing or depressurizing the actuator is continuously adjusted. As a result, excellent control is achieved.When reaching the set point, the 3/3-way valve is closed in center position to minimize the air consumption.

Four different pneumatics versions are available: for single-acting or double-acting actuators, each with “fail-safe” or “fail-freeze” function.

The intelligent, microprocessor-controlled TZIDC-120 positioner

allows you to obtain optimal results. The positioner features highprecision

control functions and high operational reliability. The optimal

parameters are set automatically during autoadjust. If necessary,

corrections can be made manually.

The total range of parameters includes:

- Operating parameters

- Adjustment parameters

- Monitoring parameters

Adjustment parameters

Pos: 7.9 /Standard-Layout/Technische Daten / Datenblatt/Aktorik/Stellungsregler/TZIDC-120 / TZIDC-

The TZIDC-120 positioner has a special function for automatic

adjustment of the parameters. The function is launched either via the

integrated operator’s panel or the user interface.

The following adjustment parameters can be activated and

configured:

Parameters for control block

To optimally adjust the actuator position, the control parameters can

be set individually for the control behavior of the valve.

Range 0 ... 100 %

Configuration of end positions for the valve to be adjusted to start

position “0” and end position “100 %".

Direction of the actuator

Calibration to both possible directions of action:

Air opens / spring force closes

or

Air closes / spring force opens

Display 0 … 100 %

Adjusting the display (0 ... 100 %) to the direction of action for opening

or closing the valve.
If you have any interest on this product,pls feel free to contact me.
Contact Information
Email address:Jackie@hkxytech.com jackie2018@126.com
Whatsapp:+86 15717178751
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751