Endress+Hauser Pressure transmitter PMC51 Cerabar

Endress+Hauser Pressure transmitter PMC51 Cerabar 

Endress+Hauser Pressure transmitter PMC51 Cerabar

Application
The Cerabar M pressure transmitter is used for the
following measuring tasks:
• Absolute pressure and gauge pressure measurement in
gases, steams or liquids in all areas of process
engineering and process measurement technology
• Level, volume or mass measurements in liquids
• High process temperature
– without diaphragm seals up to 130°C (266°F), for a
maximum of 60 minutes 150 °C (302 °F)
– with diaphragm seals up to 400°C (752°F)
• High pressure up to 400 bar (6000 psi)
• International usage thanks to a wide range of approvals
Your benefits
• Very good reproducibility and long-term stability
• High reference accuracy: up to ±0.15%,
as PLATINUM version: ±0.075%
• Turn down up to 100:1
• End-to-end modularity for differential pressure,

Endress+Hauser Pressure transmitter PMC51 Cerabar
hydrostatics and pressure (Deltabar M – Deltapilot M –
Cerabar M), e.g.
– replaceable display
– universal electronics
• Easy commissioning without the need for an operating
tool
• Easy and safe menu-guided operation
– on-site via display module
– via 4 to 20 mA with HART
– via PROFIBUS PA
– via FOUNDATION Fieldbus
• Device versions compliant with ASME-BPE
• Used for process pressure monitoring up to SIL2,
certified to IEC 61508 Edition 2.0 and IEC 61511 by
Endress+Hauser Pressure transmitter PMC51 Cerabar
The device is designed to meet state-of-the-art safety requirements and complies with applicable standards and EU regulations. If used incorrectly or for applications for which it is not intended,however, it can be a source of application-related danger, e.g. product overflow due to incorrect installation or configuration. For this reason, installation, connection to the electricity supply,commissioning, operation and maintenance of the measuring system must only be carried out by trained, qualified specialists authorized to perform such work by the facility's owner-operator. The specialist staff must have read and understood these Operating Instructions and must follow the instructions they contain. Modifications and repairs to the devices are permissible only if they are expressly approved in the Operating Instructions. Pay particular attention to the technical data and information on the nameplate.

Endress+Hauser Pressure transmitter PMC51 Cerabar