Pepperl+Fuchs Isolated Barrier KFD2-GUT-Ex1.D

Trip amplifier KFD2-GUT-Ex1.D

Pepperl+Fuchs Isolated Barrier KFD2-GUT-Ex1.D

Features
• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Thermocouple, RTD, potentiometer or voltage input
• Redundant TC input
• Current output 0/4 mA ... 20 mA
• 2 relay contact outputs
• Configurable by PACTware or keypad
• Line fault (LFD) and sensor burnout detection
• Up to SIL 2 acc. to IEC 61508/IEC 61511

Function
This isolated barrier KFD2-GUT-Ex1.D is used for intrinsic safety applications.
The device converts the signal of a resistance thermometer, thermocouple, potentiometer, or voltage source to a proportional output current. It also provides a relay trip value. The removable terminal block K-CJC-** is available as an accessory for internal cold junction compensation of thermocouples.
A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error message output. Pepperl+Fuchs Isolated Barrier KFD2-GUT-Ex1.D
The device is easily configured by the use of the PACTware configuration software. Pepperl+Fuchs Isolated Barrier KFD2-GUT-Ex1.D

Detailed Models:

Pepperl+Fuchs Isolated Barrier KFD2-GUT-Ex1.D

KCD2-SCD-1
KCD2-SCD-EX1
KCD2-SR-EX1.LB
KCD2-SR-EX2
KCD2-STC-1
KCD2-STC-EX1
KCD2-STC-EX1.2O
KCD2-UT2-EX1
KFA6-SR2-Ex1.W
KFD0-SD2-Ex1.1045
KFD2-CD2-EX1
KFD2-CRG2-EX1.D
KFD2-DWB-1.D
KFD2-EB2
KFD2-GU-1
KFD2-GUT-Ex1.D
KFD2-SCD2-EX2.LK
KFD2-SH-EX1.T.OP
KFD2-SOT2-Ex2
KFD2-SR2-Ex1.W.LB
KFD2-SR2-Ex2.W
KFD2-ST2-Ex2
KFD2-STC4-1
KFD2-STC4-EX2 
KFD2-STC4-Ex2
KFD2-UT2-1
KFD2-UT2-2
KFD2-UT2-EX1
KFD2-UT2-Ex2
KFD2-VR4-EX1.26
KFU8-FSSP-1.D