Pepperl fuchs FC-GPCD-SDI16-PF Termination Board

Pepperl fuchs FC-GPCD-SDI16-PF Termination Board

Features

• System board for Honeywell Safety Manager
• For 16-channel DI card SDI-1624
• For 8 modules
• Recommended module: HiC2822 (DI)
• 24 V DC supply
• Hazardous area: pluggable screw terminals, blue
• Non-hazardous area: SiC plug, 20-pin
Pepperl fuchs FC-GPCD-SDI16-PF Termination Board

Function

Termination Boards are made to carry isolated barriers and
provide terminal connection for wiring. The termination board
and the isolated barriers build the connection between field
and system level.

Pepperl fuchs FC-GPCD-SDI16-PF Termination Board
System connectors are syntonized to the requirements of the
I/O cards used in the particular automation system. They
ensure fast and fail-safe connection.
Information about missing supply voltage of the interface
modules is available for the system as potential free relay
contact. Wiring errors from field will be reported if the interface
module supports this function.
The Termination Boards are supplied with a robust glass fibre
reinforced plastic housing as standard. This design permits
the fast and reliable installation in the switch cabinet.
Pepperl fuchs FC-GPCD-SDI16-PF Termination Board

Connection

terminal block TB3 (1-, 2+; 3-, 4+)
Nominal voltage 24 V DC , in consideration of rated voltage of used isolators
Voltage drop 0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple ≤ 10 %
Fusing 2 A
Power dissipation ≤ 500 mW , without modules
Reverse polarity protection yes
Pepperl fuchs FC-GPCD-SDI16-PF Termination Board

If you have any interest, pls feel free to contact me as below

Jackie Ma