Moxa Combo Device Servers Nport S94501-2S-SC-WV-T

Moxa Combo Device Servers Nport S94501-2S-SC-WV-T

Features and Benefits

•  4-port RS-232/422/485 serial interface
•  Supports up to 5 managed Ethernet switch ports (fiber ports available with some models)
•  Supports DNP3 and Modbus protocols
•  IEC 61850-3, IEEE 1613-compliant (for power substations)
•  Ethernet redundancy with Turbo Ring/Chain and RSTP/STP supported
•  Real COM/TTY drivers for Windows and Linux
•  Supports IEC 61850 MMS protocol
•  Security features based on IEC 62443/NERC CIP
•  -40 to 85°C wide operating temperature

• • Moxa Combo Device Servers Nport S94501-2S-SC-WV-T

Electromagnetic Compatibility for Harsh Substation Environments
The NPort S9450I Series supports a high level of surge protection to prevent damage from the types of power surges and EMI one finds in electrical substations and industrial automation applications. Combined with a -40 to 85°C operating temperature range and galvanized steel housing, the NPort S9450I is suitable for a wide range of industrial environments.

Another plus is the NPort S9450I’s dual power supplies, which provide both redundancy, as well as a wide range of voltage inputs. The WV models accept a power 24/48 VDC power input (ranging from 18 to 72 VDC), and the HV models accept a power input of 88 to 300 VDC and 85 to 264 VAC.

Power SCADA With IEC 61850 MMS for Easy Maintenance
The current trend in power SCADA applications is to control and monitor both IT devices (switches, routers, etc.) and IEDs (sensors, actuators, etc.) with the MMS protocol. Contrast this with the more traditional management approach of using SNMP for IT devices and MMS for IEDs. In fact, SIs may even need to manage a variety of legacy devices that use proprietary communications protocols.

The NPort S9450I device servers are the world’s first device servers to integrate MMS into an IT-type device designed specifically for power SCADA applications. The NPort S9450I even supports using MMS to monitor serial communications between the S9450I and legacy devices.

Supports Modbus/DNP3 Protocol Gateway
The NPort S9450I Series provides maximum flexibility for integrating industrial Modbus/DNP3 networks of all types and sizes. The NPort S9450I is designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master/slave combination, including simultaneous serial and Ethernet masters.

The NPort S9450I device servers also support protocol conversion between DNP3 serial and DNP3 IP. All models are ruggedly constructed and are DIN-rail mountable.

Moxa Combo Device Servers Nport S94501-2S-SC-WV-T

IDC	Nport S94501-2M-SC-HV-T
IDC	Nport S94501-2M-SC-WV-T
IDC	Nport S94501-2M-ST-HV-T
IDC	Nport S94501-2M-ST-WV-T
IDC	Nport S94501-2S-SC-HV-T
IDC	Nport S94501-2S-SC-WV-T
IDC	Nport S94501-2S-ST-HV-T
IDC	Nport S94501-2S-ST-WV-T
IDC	Nport S94501-HV-T
IDC	Nport S94501-WV-T
IDC	Nport IAW5150A-6I/0-CN
IDC	Nport IAW5250A-6I/1-CN
IDC	Nport W2150A
IDC	Nport W2150A-T
IDC	Nport W2250A
IDC	Nport W2250A-T
IDC	Nport Z2150
IDC	Nport Z2150-T
IDC	Nport Z3150
IDC	Nport Z3150-T
IDC	CN2650I-16-HV-T
IDC	CN2650I-8-HV-T
IDC	Nport 5650-8-HV-T
IDC	Nport 5650-16-HV-T
IDC	Nport 6650-8-HV-T
IDC	Nport 6650-16-HV-T
IDC	Nport 6650-32-HV-T
IDC	Nport S8455I-T
IDC	Nport S8455I
IDC	Nport S8455I-MM-SC
IDC	Nport S8455I-MM-SC-T
IDC	Nport S8455I-SS-SC
IDC	Nport S8455I-SS-SC-T
IDC	Nport S8458-4S-SC-T

Moxa Combo Device Servers Nport S94501-2S-SC-WV-T

If you have any interest, pls feel free to contact me as below

Jackie Ma

HONGKONG XIEYUAN TECH CO., LIMITED

Add:7-A16,Caishen Commercial Plaza,Hangkou Railway Station,Wuhan, China

M:86-15717178751(WhatsApp & Telegram) | T:+86-27-85887732 | F:86-27-85309780 

Email:Jackie@hkxytech.com