Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Description

The PROFIBUS Repeaters OZD Profi 12M G11 are designed to be used in optical PROFIBUS field bus networks. They enable electrical PROFIBUS interfaces (RS 485 level) to be converted into optical PROFIBUS interfaces and vice-versa.

By profiting from the familiar advantages of optical transmission technology, the modules can be integrated into existing PROFIBUS field bus networks. A complete PROFIBUS field bus network with modules in line, star or ring topology, and an arbitrary combination of these, can also be built up. 

The redundant ring is also supported, thereby increasing the fail-safety of the field bus network. 

Each module has two or three mutually independent ports, which in turn consist of a transmitting and a receiving component. 

The device is powered by 24V DC voltage. A redundant feed increases operational safety. 

The electric port is a 9-pole Sub-D socket (female). An RS 485 bus segment in line with the PROFIBUS standard EN 50170 can be connected to this port. 

The optical fibers are connected using BFOC /2.5 (ST®) connectors. 

Four multicolored light-emitting diodes indicate the current operating status and possible operating malfunctions. 

One measuring output is available for each optical port where the optical input level can be measured using a conventional voltmeter.

Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Star topology

Hirschmann PROFIBUS Repeater OZD Profi 12M G11

Ordering information

OZD Profi 12M P11 

OZD Profi 12M P12 

OZD Profi 12M G11-1300

OZD Profi 12M G12-1300 

OZD Profi 12M G12-1300 EEC 

The optical radiated power of the components used in this device does not represent a potential health hazard of any description under normal, foreseeable conditions, and it complies with Class 1 in accordance with IEC 60825-1:1994+A1:1997 resp. the Degree of Endangerment 1 in accordance with IEC 60825-2:1993.

OZD Profi 12M G11 

OZD Profi 12M G12 

OZD Profi 12M G12-EEC 

Non-visible LED radiation. Do not look into the beam, not even with optical instruments. LED class 1M. Classification according IEC 60825-1:1993+A1:1997+A2:2000.

Hirschmann PROFIBUS Repeater OZD Profi 12M G11