B&R Link Bus Receiver X20BR9300

B&R Link Bus Receiver X20BR9300

B&R Link Bus Receiver X20BR9300

B&R Link Bus Receiver X20BR9300

Description
X2X Link bus receiver
Feed for X2X Link and internal I/O supply
Electrical isolation of feed and X2X Link supply
Redundancy of X2X Link supply possible by operating multiple supply modules simultaneously
Operation only on the slot to the far left
The bus receiver is used to connect the X20 System to the X2X Link. The module is equipped with a feed for the X2X Link as well as the internal I/O supply.

B&R Link Bus Receiver X20BR9300

Coated modules
Coated modules are X20 modules with a protective coating for the electronics component. This coating protects
X20c modules from condensation and corrosive gases.
The modules' electronics are fully compatible with the corresponding X20 modules.
The coating has been certified according to the following standards:
• Condensation: BMW GS 95011-4, 2x 1 cycle
• Corrosive gas: EN 60068-2-60, method 4, exposure 21 days
2.1 -40°C starting temperature
The starting temperature describes the minimum permissible ambient temperature when the power is switched
off at the time the coated module is switched on. This is permitted to be as low as -40°C. During operation, the
conditions as specified in the technical data continue to apply.

B&R Link Bus Receiver X20BR9300

Specification

B&R Link Bus Receiver X20BR9300