Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Feature

2-channel isolated barrier
24 V DC supply (Power Rail)
Dry contact or NAMUR inputs
Usable as signal splitter (1 input and 2 outputs)
2 x 2 relay contact outputs with AND logic
Line fault detection (LFD)
Reversible mode of operation
Up to SIL 2 acc. to IEC/EN 61508
Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Function

This isolated barrier is used for intrinsic safety applications. It transfers digital signals (NAMUR sensors/mechanical contacts) from a hazardous area to a safe area. Each sensor or switch controls two form A normally open relay contacts for the safe area load. The normal output state can be reversed using switches S1 and S2. Switch S3 is used to enable or disable line fault detection of the field circuit. During an error condition, the relays revert to their de-energized state and the LEDs indicate the fault according to NAMUR NE44. A unique collective error messaging feature is available when used with the Power Rail system.

Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S

Assembly

Pepperl Fuchs Switch Amplifier KFD2-SR2-Ex2.2S