AIP830-111/EIM

Yokogawa AIP830-111/EIM Operation Keyboard for Single-loop Operation  

Model AIP830-111/EIM

Operation Keyboard for Single-loop Operation

It contains an independent USB speaker (a sound function) other than buzzing alarms (buzzer sounds).

An AIP830-111/EIM Keyboard can be used per one Desktop Type HIS.

HARDWARE SPECICATIONS

Yokogawa AIP830-111/EIM Operation Keyboard for Single-loop Operation

For installation specifications and environmental conditions, which are common to the systems, refer to “System

Overview” (GS 33K01A10-50E, GS 33K01A20-50E).

• Type: Flat keyboard (Sound Function: USB Speaker)

• PC Interface:

  Interface Connector: USB A type x 2 (*1)

  Conformable USB standard

     Operation Keyboard Function : USB 2.0 (Full-speed, Bus-powered)

     Sound Function :     USB 1.1 (Full-speed, Bus-powered)

• Input Voltage: 5 V±5 % (Supplied from USB Port of PC)

• Maximum Consumption Current: 1 A

• Weight: 2.0kg (Without VESA Bracket), 2.5 kg (With VESA Braceket) (*2)

• Chassis Color: Black (Equivalent to Munsell No. N1.5)

• AIP830 belongs to IEC 61010-1 installation category Class I

    (A device not directly connected with the main power supply).

• Operating Environment

   Ambient temperature:

     5 to 40 °C (for normal operaiton)

     -20 to 60 °C (in storage and transportation)

   Ambient humidity:

    20 to 80 %RH (Non-condensing)

*1: Both connectors must always be connected directly to a PC.

*2: AIP830-111/EIM with VESA Bracket must be mounted where it holds at least 10 kg of weight.

REGULATORY COMPLIANCE

Yokogawa AIP830 Operation Keyboard for Single-loop Operation

For the detailed information of the following standards, refer to “System Overview” (GS 33K01A10-50E,GS 33K01A20-50E).

Safety Standards

[CSA] (*1)

[CE Marking] (*2)

EMC Conformity Standards

[CE Marking] (*2) (*5)

[C-Tick Marking] (*3)

[KC Marking] (*4)

*1:   AIP830-111/EIM complies to CSA only when CSA mark is indicated on the PC which connects with AIP830.

*2:   AIP830-111/EIM complies to CE Marking only when CE mark is indicated on the PC which connects with AIP830.

*3:   AIP830-111/EIM complies to C-tick marking ionly when it is indicated on the PC which connects with AIP830.

*4:   AIP830-111/EIM complies to KC Marking only when KC mark is indicated on the PC which connects with AIP830.

*5:   EN 61000-3-2 and EN 61000-3-3 in CE Marking are out of scope for AIP830.

Email address: Jackie@hkxytech.com sale1@hkxytech.com.
WhatSapp:+86 15717178751     +86 15871691193
Skype: Jackie@hkxytech.com