Yokogawa Control Bus Interface Card VF702

Yokogawa Control Bus Interface Card VF702

Yokogawa Control Bus Interface Card VF702
GENERAL
By installing the control bus interface card into the PCI Express slot of the PC/AT compatible computer, the computer is connected to V net.

FUNCTION
Interface between the PCI Express and V net

Yokogawa Control Bus Interface Card VF702

SPECIFICATIONS
Connection Specifications
Connection method: Connect a coaxial cable with
Model YCB146, T-type connector
Transmission: 10BASE-2 compliance
Connector: BNC connector
Max. distance: 185 m (When using 10BASE-2 cable only)
PCI Express Specifications
Applicable revision:
PCI Express CEM Specification 1.0a x1, 2.5 GT/s signaling
This card can be installed in any of the PCI Express slots x1 to x16.
This card cannot be installed in a PCI slot.
Voltage
Power supply voltage: 3.3 V ± 9 %
Current Consumption
Max. 2.4 A
Weight
Approx. 0.15 kg (T-type connector excluded)
External Dimensions: 22 (W) × 126.5 (H) × 193.54 (D) mm
Regulartory Compliance
For conforming standards of the CENTUM VP system, see “System Overview” (GS 33K01A20-50E).
EMC Standards:
[CE Marking]
[C-Tick Marking]
[KC Marking]

T-TYPE CONNECTOR AND
CONTROL BUS CABLE
CONNECTION

Yokogawa Control Bus Interface Card VF702
COMPATIBILITY WITH VF701
The V net interface of VF702 is compatible with that of VF701, so that a mixture of VF701-installed stations and VF702-installed stations is allowed on the same control bus.
Setting the domain number and station number of a VF702 card can be performed in a same way as for a VF701 card.

MODEL AND SUFFIX CODE
Model Description
VF702 Control Bus Interface Card
Yokogawa Control Bus Interface Card VF702