Yokogawa Vnet/IP Interface Card VI701

Yokogawa Vnet/IP Interface Card VI701

Yokogawa Vnet/IP Interface Card VI701
GENERAL
By installing the control bus interface card into the PCI slot of the PC/AT compatible personal computer, the computer is connected to Vnet/IP.

GENERAL
By installing the control bus interface card into the PCI slot of the PC/AT compatible personal computer, the computer is connected to Vnet/IP.

Yokogawa Vnet/IP Interface Card VI701
SPECIFICATIONS
For conforming standards of the CENTUM CS 3000 system, see Integration Production Control System CENTUM CS 3000 Vnet/IP System Overview (GS
33P01B10-31E).
Communication Speed 1000 Mbps Full Duplex
Connection Specifications
Cable: CAT5e (Enhanced Category 5 cable), UTP
Transmission: 1000Base-T compliance
Connector: RJ45 connector
Max. distance: 100 m (Distance between VI701 and Layer 2 switch)
Yokogawa Vnet/IP Interface Card VI701

Autonegotiation
PCI Bus Specifications
Applicable revision:
PCI Bus Specification 3.0
32 bit/33 MHz
This card can be installed on the PCI-X slot, either.
Note: If this card is installed, the bus speed of the PCI-X bus segment is 33 MHz.
Yokogawa Vnet/IP Interface Card VI701

Voltage
Power supply voltage: 5 V
Signal voltage: 3.3 V/5 V
Current Consumption
Max. 2.5 A
Weight 0.2 kg
External Dimensions
106.68 mm x 167.64 mm
Regulartory Compliance
EMC Standards:
[CE Mark]
[C-Tick Mark]

MODEL AND SUFFIX CODE
Model Description
VI701 Vnet/IP Interface Card