Current Location: Home> Product Class> Yokogawa> Yokogawa Test & Measurement>

Yokogawa CA71 HANDY CAL calibrator CA71

Product Name：Yokogawa CA71 HANDY CAL calibrator CA71
Product Number：Yokogawa CA71
Brand：Yokogawa
Views：316

你添加了1件商品查看购物车

简单介绍

Yokogawa CA71 HANDY CAL calibrator CA71 Yokogawa CA71 HANDY CAL calibrator CA71 Yokogawa CA71 HANDY CAL calibrator CA71

Yokogawa CA71 HANDY CAL calibrator CA71

的详细介绍

Yokogawa CA71 HANDY CAL calibrator CA71 HANDY CAL calibrator
Overview

Yokogawa CA71 HANDY CAL calibrator CA71 HANDY CAL calibrator
Generation and Measurement of Pulse

Frequency can be set in the wide range of 1 Hz to 11 kHz.

With switch selection, the CA51/CA71 can generate or

measure pulses.

It is suitable for checking a flow meter or receiver.

Generation and Measurement of Voltage Pulse and

Contact Pulse

Yokogawa CA71 HANDY CAL calibrator CA71 HANDY CAL calibrator
The CA51/CA71 can generate and measure voltage

pulse (amplitude: +0.1 V to +15 V, zero base waveform)

and contact pulse.

Pulse Cycle Function

The set pulse can be output. It is suitable for checking

integrating counter. (Any value of frequency and

amplitude is settable.)

CPM (count/min), CPH (count/hour) Function

In MEASURE mod (functions for measurement), pulse

number per minute is counted. It is suitable for the

integration of discontinuous pulse signals from flow

meter.

In SOURCE mode (functions for generation), you can

select either generation of continuous pulse signals or

generation of given number of pulses.
Yokogawa CA71 HANDY CAL calibrator CA71 HANDY CAL calibrator

Measurement of Commercial Power Supply Voltage

AC voltage up to 300 V can be measured. World-wide

supply voltage can also be measured.

Useful Functions

Divided Output (n/m) Function

The divided output (n/m) function outputs a value n/m

times the setpoint of a voltage, current, resistance, TC or

RTD signal.

When inputting the percentage of instrument input value

within the range of zero to full scale, bothersome

calculations for percentage is not required..

Auto Step Function

Yokogawa CA71 HANDY CAL calibrator CA71 HANDY CAL calibrator
The auto-step function divides the range of zero to full

scale into m equally, increases or decreases the output in

a step-by-step manner by changing the variable n of the

n/m output from n=0 to m when the divided output

function (n/m) is selected.

Sweep Function

The sweep function linearly increases or decreases the

output.

Memory Function

With a pair of generated and measured signal values in a

set, the CA51/CA71 can handle a maximum of 50 sets of

data by means of its built-in memory.

Communication Function (CA71 only)

By connecting the communication cable (RS-232): 91017,

you can read internal memory data and measured value,

or set the generated signal from a personal computer.

If you have any interest on this product,pls feel free to contact me.
Contact Information
Email address:Jackie@hkxytech.com jackie2018@126.com
Whatsapp:+86 15717178751
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751