Yokogawa Process Multimeter CA450 Process Multimeter
Overview
Yokogawa CA450 Process Multimeter
	n Loop check functions 
	• Simultaneous 24 V loop power and mA measurement 
	• HART/BRAIN mode setting with loop power 
	(Adds 250 ohm resistance internally) 
	nGeneration functions 
	• SIMULATE (SINK) function simulates transmitters 
	• 4-20 mA span/step/auto-step/sweep output 
	nMeasurement functions 
	• High accuracy signal measurement: 
	DC mA 0.05%/30.000 mA 
	• Handheld DMM function 
	• Peak Hold function for the peak voltage measurement of DCS power supply
	• Dedicated sensor modes for direct reading of many sensor signal types 
	  Enhanced Safety—helps eliminate electric shocks
	• Current terminal shutter prevents incorrect connections 
	• 1 A or more of AC/DC current can be read directly using the optional clamp probe and scaling in SENSOR mode.*1
	• Measurement categories 600 V CAT. IV, 1000 V CAT. IIIn Linking with a PC
	• DMM Communication Package can be used to save and manage the measurement data.
	Yokogawa Process Multimeter CA450 Process Multimeter
	
		Span generation function 
	
	
		The span from 0 to 20mA or 4 to 20 mA (0 to 100%) can be switched with one touch. It is easy to adjust the span of the valve and check the operation of the valve.
Step generation function 
	
	
		The step can be generated by increasing or decreasing the step between 0 and 20 mA or between 4 and 20 mA in increments of 25% up to 100% with one touch, or stepwise automatically (step width is selectable) to improve work effi ciency. The Slow mode of Step Mode can also be used to change the step time in accordance with the performance of fi eld devices. 
	
	
		Sweep generation function 
	
	
		This function is used to increase or decrease the output value to the setpoint at the specifi ed ramp rate. It is possible to switch between Fast (15 sec) and Slow (40 sec) increase or decrease.
Yokogawa Process Multimeter CA450 Process Multimeter
		
			The CA450 can directly read the various sensor output signals (mV DC/AC) at any scaling. The units can be changed (16 units are available).Output signal and scaled value are simultaneously displayed.
			
				Yokogawa CA450 Process Multimeter
			
			
				Yokogawa CA450 Process Multimeter
			
			
				Yokogawa CA450 Process Multimeter
			
			
				Yokogawa CA450 Process Multimeter
			
If you have any interest on this product,pls feel free to contact me.
Contact Information
Email address:Jackie@hkxytech.com  jackie2018@126.com
Whatsapp:+86 15717178751     
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751