Moxa Controllers & I/Os ioLogik E1211

Moxa Controllers & I/Os ioLogik E1211

Features and Benefits

•  
  •  User-definable Modbus TCP Slave addressing
  •  Supports EtherNet/IP Adapter mode Requires online registration (available free of charge)
  •  Supports RESTful API for IIoT applications
  •  2-port Ethernet switch for daisy-chain topologies
  •  Saves time and wiring costs with peer-to-peer communications
  •  Active communication with MX-AOPC UA Server
  •  Supports SNMP v1/v2c
  •  Easy mass deployment and configuration with ioSearch utility
  •  Friendly configuration via web browser
  •  Simplifies I/O management with MXIO library for Windows or Linux
  •  Class I Division 2, ATEX Zone 2 certification Class I Division 2 and ATEX currently do not apply to the E1213/E1213-T models.
  •  Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Moxa Controllers & I/Os ioLogik E1211

Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.ntroduction
The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.

Daisy-Chained Ethernet I/O Connection
This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.
Change in password

Moxa Controllers & I/Os ioLogik E1211

DAC	ioLogik E1210
DAC	ioLogik E1210-T
DAC	ioLogik E1211
DAC	ioLogik E1211-T
DAC	ioLogik E1212
DAC	ioLogik E1212-T
DAC	ioLogik E1213
DAC	ioLogik E1213-T
DAC	ioLogik E1214
DAC	ioLogik E1214-T
DAC	ioLogik E1240
DAC	ioLogik E1240-T
DAC	ioLogik E1241
DAC	ioLogik E1241-T
DAC	ioLogik E1242
DAC	ioLogik E1242-T
DAC	ioLogik E1260
DAC	ioLogik E1260-T
DAC	ioLogik E1262
DAC	ioLogik E1262-T
DAC	ioLogik E1261W-T
DAC	ioLogik E1261H-T
DAC	ioLogik E1263H-T

Moxa Controllers & I/Os ioLogik E1211

If you have any interest, pls feel free to contact me as below

Jackie Ma

HONGKONG XIEYUAN TECH CO., LIMITED

Add:7-A16,Caishen Commercial Plaza,Hangkou Railway Station,Wuhan, China

M:86-15717178751(WhatsApp & Telegram) | T:+86-27-85887732 | F:86-27-85309780 

Email:Jackie@hkxytech.com