Moxa Ethernet remote I/O ioLogik E1241
Moxa Ethernet remote I/O ioLogik E1241
的详细介绍Moxa Ethernet remote I/O ioLogik E1241
Moxa Ethernet remote I/O ioLogik E1241
Features and Benefits
User-definable Modbus TCP Slave addressingSupports RESTful API for IIoT applications
Supports EtherNet/IP Adapter
2-port Ethernet switch for daisy-chain topologies
Saves time and wiring costs with peer-to-peer communications
Active communication with MX-AOPC UA Server
Supports SNMP v1/v2c
Easy mass deployment and configuration with ioSearch utility
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Class I Division 2, ATEX Zone 2 certification
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Moxa Ethernet remote I/O ioLogik E1241
Introduction
The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.
Daisy-Chained Ethernet I/O Connection
This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.
Moxa Ethernet remote I/O ioLogik E1241
Specifications
Digital Inputs
|
Connector |
Screw-fastened Euroblock terminal |
|
Sensor Type |
Dry contact Wet contact (NPN or PNP) |
|
I/O Mode |
DI or event counter |
|
Dry Contact |
On: short to GND Off: open |
|
Wet Contact (DI to COM) |
On: 10 to 30 VDC Off: 0 to 3 VDC |
|
Counter Frequency |
250 Hz |
|
Digital Filtering Time Interval |
Software configurable |
|
Points per COM |
ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels |
Digital Outputs
|
Connector |
Screw-fastened Euroblock terminal |
|
I/O Type |
ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source |
|
I/O Mode |
DO or pulse output |
|
Current Rating |
ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel |
|
Pulse Output Frequency |
500 Hz (max.) |
|
Over-Current Protection |
ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5 A per channel @ 25°C |
|
Over-Temperature Shutdown |
175°C (typical), 150°C (min.) |
|
Over-Voltage Protection |
35 VDC |
MTBF
|
Time |
ioLogik E1210 Series: 671,345 hrs ioLogik E1211 Series: 923,027 hrs ioLogik E1212 Series: 561,930 hrs ioLogik E1213 Series: 715,256 hrs ioLogik E1214 Series: 808,744 hrs ioLogik E1240 Series: 474,053 hrs ioLogik E1241 Series: 888,656 hrs ioLogik E1242 Series: 502,210 hrs ioLogik E1260 Series: 660,260 hrs ioLogik E1262 Series: 631,418 hrs |
|
Standards |
Telcordia SR332 |
Moxa Ethernet remote I/O ioLogik E1241
Ordering Information
ioLogik E1210 ioLogik E1210-T
ioLogik E1211 ioLogik E1211-T
ioLogik E1212 ioLogik E1212-T
ioLogik E1213 ioLogik E1213-T
ioLogik E1214 ioLogik E1214-T
ioLogik E1240 ioLogik E1240-T
ioLogik E1241 ioLogik E1241-T
ioLogik E1242 ioLogik E1242-T
ioLogik E1260 ioLogik E1260-T
ioLogik E1262 ioLogik E1262-T
|
Model Name |
Input/Output Interface |
Digital Output Type |
Operating Temp. |
|
ioLogik E1210 |
16 x DI |
– |
-10 to 60°C |
|
ioLogik E1210-T |
16 x DI |
– |
-40 to 75°C |
|
ioLogik E1211 |
16 x DO |
Sink |
-10 to 60°C |
|
ioLogik E1211-T |
16 x DO |
Sink |
-40 to 75°C |
|
ioLogik E1212 |
8 x DI, 8 x DIO |
Sink |
-10 to 60°C |
|
ioLogik E1212-T |
8 x DI, 8 x DIO |
Sink |
-40 to 75°C |
|
ioLogik E1213 |
8 x DI, 4 x DO, 4 x DIO |
Source |
-10 to 60°C |
|
ioLogik E1213-T |
8 x DI, 4 x DO, 4 x DIO |
Source |
-40 to 75°C |
|
ioLogik E1214 |
6 x DI, 6 x Relay |
– |
-10 to 60°C |
|
ioLogik E1214-T |
6 x DI, 6 x Relay |
– |
-40 to 75°C |
|
ioLogik E1240 |
8 x AI |
– |
-10 to 60°C |
|
ioLogik E1240-T |
8 x AI |
– |
-40 to 75°C |
|
ioLogik E1241 |
4 x AO |
– |
-10 to 60°C |
|
ioLogik E1241-T |
4 x AO |
– |
-40 to 75°C |
|
ioLogik E1242 |
4 DI, 4 x DIO, 4 x AI |
Sink |
-10 to 60°C |
|
ioLogik E1242-T |
4 DI, 4 x DIO, 4 x AI |
Sink |
-40 to 75°C |
|
ioLogik E1260 |
6 x RTD |
– |
-10 to 60°C |
|
ioLogik E1260-T |
6 x RTD |
– |
-40 to 75°C |
|
ioLogik E1262 |
8 x TC |
– |
-10 to 60°C |
Moxa Ethernet remote I/O ioLogik E1241
