MTL safety barriers MTL5522 Solenoid Alarm Driver

MTL safety barriers MTL5522 Solenoid Alarm Driver

MTL safety barriers MTL5522 Solenoid Alarm Driver

MTL safety barriers MTL5522 Solenoid Alarm Driver

Feature

The MTL5522 is a loop-powered module which enables a device located in the hazardous area to be controlled from the safe area. The
MTL5522 can drive a certified intrinsically safe low-power load, as well as non-energy-storing simple apparatus such as an LED. The unit's
input/output isolation allows the control switch to be connected into either side of the 24V dc supply circuit.
MTL safety barriers MTL5522 Solenoid Alarm Driver
 

Specification

Number of channels
One
Location of load
Zone 0, IIB, T4–6 hazardous area if suitably certified
Div. 1, Group C hazardous location
Input voltage
20 to 35V dc
Hazardous-area output
Minimum output voltage: 10.7V at 70mA
Maximum output voltage: 24V from 158Ω
Current limit: 70mA minimum
Output ripple
< 0.5% of maximum output, peak to peak
Response time
Output within 10% of final value within 100ms
MTL safety barriers MTL5522 Solenoid Alarm Driver

MTL safety barriers MTL5522 Solenoid Alarm Driver