MTL5523V–VL Solenoid/Alarm driver with voltage control

Product overview

MTL5523V–VL Solenoid/Alarm driver with voltage control 

              MTL5523V – VL Solenoid/Alarm driver with voltage control 

MTL5523V product specification as below

MTL5523V–VL Solenoid/Alarm driver with voltage control 

With the MTLx523V/VL interface, an on/off device in a hazardous area can be controlled by a voltage signal in the safe area. It is suitable for driving loads such as solenoids. Line fault detection (LFD), which operates irrespective of the output state, is signalled by a safe-area solid-state switch which energises if a field line is open or short– circuited. Earth fault detection can be provided by connecting an MTL4220 earth leakage detector to terminal 3.

SPECIFICATION

MTL5523V–VL Solenoid/Alarm driver with voltage control 

See also common specification

Number of channelsOne

Location of load

Zone 0, IIC, T4–6 hazardous area if suitably certified

Div. 1, Group A, hazardous location

Hazardous-area output (MTLx523V)

Minimum output voltage: 13.6V at 48mA

Maximum output voltage: 24V from 180Ω

Maximum off-state output voltage: 4V from 180Ω

Current limit: 48mA minimum

Hazardous-area output (MTLx523VL)

Minimum output voltage: 11.1V at 48mA

Maximum output voltage: 24V from 232Ω

Maximum off-state output voltage: 4V from 232Ω

Current limit: 48mA minimum

Output ripple

< 0.5% of maximum output, peak to peak

Control input

Suitable for 24V logic drive

Output turns on if > 18V applied across control input

Output turns off if < 5V applied across control input

Maximum control input voltage: 28V

Maximum control system output leakage current: 0.5mA

Response time

Output within 10% of final value within 100ms

Line fault detection (LFD)

Open or short circuit in field cabling energises solid state

line-fault signal.

LFD transistor is switched off, provided that the field circuit impedance is >

55Ω and < 4kΩ.

Line fault signal characteristics

Maximum off-state voltage: 35V

Maximum off-state leakage current: 10µA

Maximum on-state voltage drop: 2V

Maximum on-state current: 50mA

LED indicators

Green: power indication

Yellow: output status, on when output active

Red: LFD indication, on when line fault detected

Maximum current consumption

100mA at 24V dc

Power dissipation within unit

1.2W with typical solenoid valve, output on

2.0W worst case

Safety description (MTLx523V)

Vo=25V Io=147mA Po= 0.92W Um = 253V rms or dc

Safety description (MTLx523VL)

Vo=25V Io=108mA Po= 0.68W Um = 253V rms or dc

Other related models for 5523V as below for your reference.

MTL5523V–VL Solenoid/Alarm driver with voltage control 

MTL5018AC

MTL5501-SR

MTL5510

MTL5510B

MTL5511

MTL5513 

MTL5514

MTL5514D

MTL5516C

MTL5517

MTL5521

MTL5522

MTL5523

MTL5523V – V

MTL5524

MTL5525

MTL5526

MTL5541

MTL5541A

MTL5541AS 

MTL5541S

MTL5544

MTL5544A

MTL5544AS

MTL5544D

MTL5544S

MTL5546

MTL5546Y

MTL5549

MTL5549Y

MTL5573

MTL5575

MTL5576-RTD

MTL5576-THC

MTL5581

MTL5582

MTL5582B

MTL5991 

MTL5531

MTL5532

MTL5533

MTL5561

MPA5500

MTL5051

MTL5053

MTL5314

MTL5599 

MTL5523V–VL Solenoid/Alarm driver with voltage control 

If you have any other question about MTL5523V, please feel free to contact me here!

Contact details

HONGKONG XIEYUAN TECH CO., LIMITED

Telephone:86-027-85508558

Mobile :86-15871691193(Whatapp&Wechat is available)

Skype:xyautomation

E-mail:sales1@hkxytech.com