Current Location: Home> Product Class> MTL> MTL5500>

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

Product Name：MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510
Product Number：MTL5510
Brand：MTL
Views：100

你添加了1件商品查看购物车

简单介绍

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510 MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510 MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

的详细介绍

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

MTL4510 – MTL5510 SWITCH/ PROXIMITY DETECTOR INTERFACE

4-channel, digital input

The MTLx510 enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors located in a hazardous area. Each pair of output transistors shares a common terminal and can switch +ve or –ve polarity signals. A range of module configurations is available (see Table 1) through the use of selector switches. When proximity detector modes are selected, LFD is enabled and the output switches to OFF if a line fault is detected.

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

Specification：
Number of channels
4, configured by switches
Location of switches
Zone 0, IIC, T6 hazardous area Div 1, Group A hazardous location
Location of proximity detectors
Zone 0, IIC, T4-6 hazardous area if suitably certified Div 1, Group A, hazardous location
Hazardous-area inputs
Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)
Voltage applied to sensor
7 to 9V dc from 1kΩ ±10%
Input/output characteristics

Normal phase
Outputs closed if input > 2.1mA (< 2kΩ in input circuit)

Outputs open if input < 1.2mA (> 10kΩ in input circuit)
Hysteresis: 200µA (650Ω) nominal

Line fault detection (LFD) (when selected)
User-selectable via switches on the side of the unit. Open-circuit alarm on if Iin < 50µA
Open-circuit alarm off if Iin > 250µA
Short-circuit alarm on if Rin < 100Ω Short-circuit alarm off if Rin > 360Ω
Note: Resistors must be fitted when using the LFD facility with a contact input
500Ω to 1kΩ in series with switch

20kΩ to 25kΩ in parallel with switch
MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

Mode options

MODE	o/p 1	o/p 2	o/p 3	o/p 4	i/p type
0	chA	chB	chC	chD	switch
1	chA rev.	chB	chC	chD
2	chA	chB rev.	chC	chD
3	chA	chB	chC rev.	chD
4	chA	chB	chC	chD rev.
5	chA rev.	chB	chC rev.	chD
6	chA	chB rev.	chC	chD rev.
7	chA rev.	chB rev.	chC rev.	chD rev.
8	chA	chB	chC	chD	prox. detector + LFD
9	chA rev.	chB	chC	chD
10	chA	chB rev.	chC	chD
11	chA	chB	chC rev.	chD
12	chA	chB	chC	chD rev.
13	chA rev.	chB	chC rev.	chD
14	chA	chB rev.	chC	chD rev.
15	chA rev.	chB rev.	chC rev.	chD rev.

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510

Type

MTL4510 – MTL5510

MTL Safety Barriers Crouse-Hinds Switch/ Proximity Detector Interface MTL5510