Current Location: Home> Product Class> MTL> MTL5500>

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE

Product Name：MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE
Product Number：MTL5018AC
Brand：MTL
Views：326

你添加了1件商品查看购物车

简单介绍

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE

的详细介绍

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL5018AC

Overview

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL5018AC

The MTL5018ac enables two safe-area loads to be controlled by two switches or proximity detectors located in a hazardous area.Two relay outputs are provided. Independent phase reversal control

allows an alarm condition to be signalled for either state of the sensor.A selectable line fault detect (LFD) facility detects an open or short circuit in either field circuit.

SPECIFICATION

See also common specification

Number of channels

Two

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL5018AC

Location of switches

Zone 0, IIC, T4–6 hazardous area

Div. 1, Group A hazardous location

Safe-area output

Two relays with changeover contacts

Hazardous-area inputs

Inputs conforming to NAMUR/DIN 19234 standards for proximity

detectors

Voltage applied to sensor

7 to 9V from 1kΩ ±10%

Input/output characteristics

Normal (reverse) phase:

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL5018AC

output energised (de-energised) if Iin >2.1mA or Rin <2kΩ

output de-energised (energised) if Iin <1.2mA or Rin >10kΩ

Hysteresis: 200μA, typical

Line fault detection (LFD)

User-selectable via switches on the top of the unit. Line

faults are indicated by an LED for each channel. A detected line

fault de-energises the relay.

Open-circuit alarm on if Iin <100μA

Open-circuit alarm off if Iin >250μA

Short-circuit alarm on if Rin <100Ω

Short-circuit alarm off if Rin >360Ω

Note: Resistors must be fitted when using the LFD facility with a

contact input

500Ω to 1kΩ in series with switch

20kΩ to 25kΩ in parallel with switch

Phase reversal

Independent for each channel, user-selectable

Relay type

Single pole, changeover contacts

Note: reactive loads must be adequately suppressed

Relay characteristics

MTL MTL5018AC SWITCH PROXIMITY DETECTOR INTERFACE MTL5018AC

Response time: 10ms maximum

Contact rating: 250V ac, 2A, cosø >0.7

40V dc, 2A, resistive load

LED indicators

Green: power indication

Yellow: two: status of each channel (on when outputs are

energised)

Red: two: LFD indication for each channel (on when line

fault detected)

Maximum power dissipation

<2.5W

Isolation

250V ac or dc between power supply, hazardous-area circuits

and relay outputs

Safety description (each channel)

10.5V, 800Ω, 14mA, Um= 250V rms or dc

Power Supply

85 to 265V ac

45 to 65 Hz
Contact Information
Email address:Jackie@hkxytech.com jackie2018@126.com
Whatsapp:+86 15717178751
Skype:Jackie@hkxytech.com
Telegram:+86 15717178751
Phone:+86 15717178751